The Linksys RE1000 Wi-Fi Range Extender N300 permits you to repeat the wireless signal of any access point or router to provide ultimate Internet connectivity even to remote areas through a wired or wireless mode of connection.

It allows us to do any of our work without any interruption.

  Provides ultimate connectivity throughout our home!!

linksys Re1000 Extender

Description of basic parts of Linksys RE1000 wireless-N range extender

  • Power – The Power LED lights up white when the extender is powered ON. The light flashes slowly every three seconds when the extender is reset to factory defaults or during a firmware upgrade process. When the extender is ready for use, the light is continuously lit.  If there is an error then we can figure it out as the light on the Linksys extender flashes quickly (every second).
  • Wi-Fi Protected Setup LED
  • When the Wi-Fi Protected Setup process is active at that time the light flashes slowly.
  • When the Wi-Fi Protected Setup is successful, at that point the light on the Linksys RE1000 is continuously lit.

Top Panel

linksys re1000 extender top panel

 Wi-Fi Protected Setup (WPS) button – if you are having client devices that support Wi-Fi Protected Setup like wireless printers and many more, this button automatically configures wireless connection and security after initial setup.

 Power switch – it guides us about whether the extender ON or OFF.

NOTE:  This functionality is only available in the European versions of the RE1000.

 Reset button –  It is used to reboot the device when it is not responding properly. Press the Reset button for around eight seconds to reset the extender to its factory defaults. 

 You can also reset the device from the Administration > Factory Defaults screen in the extender’s web-based setup page.

 Power port – This is the place where you connect the power adapter.

Bottom Panel

bottom panel of re6300

 Ethernet port – the Fast Ethernet port works as a wireless in order to quickly connect any wired Ethernet device to a wireless network.  The green LED is lit when an Ethernet device is connected and active on this port.

FEATURES of Linksys RE1000

  • Amazing COMPATIBILITY with all the other devices Wireless-N technology is able to work with all kinds of devices.
  • Boost up the speed of your WiFi network Boost up the range of your wireless router results in reducing dead zones.
  • Effective TRAFFIC MANAGEMENT Reduce buffering and loading by providing high-bandwidth activities.
  • Extremely easy to SETUP Installation wizard allows easy installation and suggests optimal placement.

How to setup Linksys RE1000 wireless-N range extender

Now we will learn about Linksys RE1000 setup

So, Before beginning with the setup procedure, ensure these following requirements:

  • Active 2.4 GHz wireless network connectivity throughout your home
    As the wireless-N range extender will only detect and function with the 2.4 GHz network.
  • Wireless Network Name (SSID) 
  •  Proper and sure Password Before working with any technical devices always keep in mind about your safety and security. For better connection and efficient performance, it is suggested to use the following security types:

Wi-Fi Protected Access (WPA)2/WPA Mixed Mode, WPA2 Personal, and WPA Personal.

NOTE:  The SSID and the security key are your wireless network settings.

If you do not have these settings then in that case contact your router’s manufacturer to get people support in getting them. 
QUICK TIP:  If you already tried installing the range extender and faced any type of error then you may need to reset your range extender before proceeding with the steps mentioned below. 

So let’s begin with the process of setting up Linksys RE1000:

Step 1:
 Firstly, insert the range extender’s Setup CD into your optical (CD-ROM or DVD-ROM) drive.

  As soon the AutoPlay window appears, directly click on the Set up your Linksys Range Extender option.

re1000 auto play window setup

NOTE:  If in case you are not able to see the AutoPlay window, go to your computer’s local drive and double-click on the  icon to move on.

Step 2:
When the End-User License Agreement window appears, check the I have read and accept the License Terms for using this software box, and then click on Next in order to continue.

Step 3:
Wait until the software is preparing to establish a wireless connection with your home router and wireless-N range extender.

NOTE: if you see any kind of error messages below then follow the instructions provided in the setup window and then click Next to continue.

Step 4:
Once your wireless connection has been worked out then plug your extender into an electrical socket and then click on Next.

NOTE:  The software will then search for your range extender and will try to connect to your network.

QUICK TIP:  in order to prevent the error about your range expander being not detected then make sure that the device is within range of the router at the point of installation.

Step 5:

There are a number of Linksys RE1000 software recommended for Linksys RE1000 extender setup.
If the setup software is successful in detecting your range extender, it will ask you to choose any wireless network.

  Then select your extender’s name and then click on Connect.
NOTE:  The default name of the range extender is LinksysExtenderXXXXX where the XXXXX represents the last five digits of your extender’s serial number.
Step 6:
 Now, select Wireless Network Name (SSID) of your router, and then click on Next.

Step 7:

 Once you are done with this, enter your wireless network’s password.  Click on OK.

NOTE:  WPA keys are case-sensitive which means abc are treated differently from ABC. WEP keys are hexadecimal (0-9 and a-f) characters.
The screen will display that your range extender is being set up.

Step 8:
If you want to shift your range extender to a different location, follow the instructions provided in the setup screen to do so and then click on Next.

NOTE:  The software will check your range extender’s connection to the wireless network.

Step 9:
 Once you are done with all this, A window will appear to inform you that your range extender has been set up successfully

Click on Close to finish the Linksys wireless extender RE1000 setup procedure.

NOTE:  When you check your wireless network connection, you will not be able to view the range extender’s name.  Instead, it will show that you are successfully connected to your router.

Linksys RE1000 reset always prove to be fruitful in solving most of the connecting problems 

For excellent performance, it is suggested to use a Linksys Wi-Fi or Smart Wi-Fi Router for your RE1000 wireless-N range extender.

         So now your Linksys extender is being set up successfully.

How to reset Linksys RE1000

 Sometimes it happens that our Linksys extender stops working so in that case resetting is the ultimate solution to your problem. Resetting the Linksys extender will restore it to its factory default settings.

 You will need to reset your extender if you face either of the following happens:

  • If you are dealing with continuous dropping out connections while working with the range extender.
  • If you are manually setting up the range extender after an unsuccessful attempt at using the setup software.
  •  If you are unable to access the web-based setup page of the range extender.
  • If the range extender’s light is not solid or blinking after doing a power cycle.

QUICK TIP:  Before resetting the range extender, you can create a backup of the device’s configuration settings and restore them without going through all the configuration process again.

 Follow the steps below to learn how to make this attempt.

So let’s begin with Linksys RE1000 reset process:

Step 1:
open the web-based setup page of the range extender. 

Step 2:

Cliick the Backup Configurations which is under the management sub-tab button then click on Save Settings.

NOTE:  Before beginning with the steps given below, make sure your device is turned ON.

There are two ways available to reset the range extender to factory default settings.

Pressing the Reset button on the device

The location of your range extender’s reset button will vary depending on its model.

  Press and hold the range extender’s Reset button for at least 10 seconds.  Power cycle the device in order to mark the reset process.


Resetting through the web-based setup page

Step 1:
start any web browser and open the web-based setup page of your Linksys range extender.

Step 2:
 select Factory Defaults which is located under administration.

Step 3:
Click on the Restore Factory Defaults button.

Step 4:
so now to complete the process, unplug the range extender from the power outlet and leave it OFF for 30 seconds. 

Plug the device back in.

So finally, your Linksys RE1000 range extender is properly rebooted.

Linksys RE1000 setup without cd

The Linksys Wireless-N Range Extender permits us to repeat the wireless signal of any access point or router to provide excellent Internet connectivity even to remote areas by a wired or wireless connection.

  This article will help you to know about how to manually configure your wireless range extender.

Before you begin with this process, make sure that you’ve done the following:

1.  Identify the access point’s wireless settings which are:

• Wireless network name (SSID)
• Wireless channel
• Wireless password of the Linksys extender

  • Reset the Linksys range extender – Press and hold the Reset button that is located at the top panel of the range extender for 10 seconds or until the LED begins blinking to restore to its factory default settings.

So let us begin Linksys extender setup RE1000:

Step 1:
 using an Ethernet cable connect your computer to the Ethernet port of your range extender.

Step 2: 
once you have connected it to an Ethernet cable, plug your range extender to any power outlet. Ensure that the LED lights are quite stable.

Step 3:
open a web browser either in the tablet or laptop and enter your router’s IP Address or “” in the Address bar.  

NOTE:  If your computer has defined a default startup web page on your browser, the dialog box will shoot up automatically asking for a username and passcode.

Step 4:
You will be prompted with a window asking for a username and password.  Leave the User Name blank and enter “admin” in the Password field and then, click on Log In.

Step 5:
Click Wireless > Basic Wireless Settings.

Step 6:
Set the radio button to Manual and then enter your home router’s Network Name (SSID).

Step 7:
 select the security settings that match your router’s configuration, on Wireless security selection  Enter your Passphrase or WEP Key there, andthen click on Save Settings.

  • WPA2/WPA Mixed Mode
  • WPA Personal or WPA2 Personal

QUICK TIP:  For optimum Wireless-N performance, it is recommended to use WPA/WPA2 wireless security on your router and range extender for proper and remarkable security.

Step 8:
Unplug the power cables of the router and the range extender for at least 30 seconds.  Plugin the router first.  Wait until all the lights are quite stable then plug in the range extender.

Your range extender should now be synchronized with your router.

 So this is how you can set up your extender without any installation of cd.

Linksys RE1000 not working

Working with your Linksys wireless range extender’s web-based setup page allows you to configure your advanced settings.  If you are facing problems  regarding its access, this can be due to the following reasons:

  • Connection to the device is not established
  • The range extender is wirelessly connected to your network but it’s not detecting the internet connection from your network

Before you begin, make sure that you have tried accessing your Linksys range extender’s web-based setup page using its IP address or through the network map feature on your computer system.   

Let’s figure out some solutions to your problems

some troubleshooting steps to solve your problem

1. Check if your computer is properly connected to the range extender’s Wi-Fi

Ensure that you are connected to the Wi-Fi name of your range extender. 

 To check this click on your computers’ Wireless Utility and it will display the SSID which your computer device is connected to.  If you are not connected to the range extender’s SSID then select the SSID on the list of available networks then enter your network password and click on Connect or Join.
Once connected, access the range extender’s web-based setup page.  

 2. Check the indicator light of the Linksys RE1000 range extender

The indicator light will help you in identifying the status of your WiFi extender.  Check your product’s User Guide to confirm if the range extender is connected to the network or not.

 3. Power cycle the range extender

Disconnect and reconnect the range extender from the power source. In this way try to apply disconnect and reconnect policy.  Wait until the Power LED on the range extender is ready to work (Check the product’s User Guide to determine when the range extender is ready to access).

4. Check the computer’s connectivity to the device 

ping test can trace the communication between the computer and the range extender. 

In order to ping the range extender, you will need to obtain its IP address.  If your range extender is not yet configured, then you are required to give its default IP address and that is

Otherwise, you need to determine the extender’s IP address through the DHCP Client Table on your router.   

NOTE:  If in case all the steps mentioned above failed then try to disable any security software on your computer system before accessing the range extender’s web-based setup page.   

5. Try to reset the device to factory defaults 

NOTE:  Resetting your range extender will restore its factory settings and you will need to run the Setup CD again or manually set up your range extender.

Press and hold the Reset button of your range extender for five to 10 seconds or until the LED starts blinking.   

If you still face any problem or you have any queries regarding Linksys RE1000 WiFi range extender N300 so you can look for Linksys RE1000 manual which will definitely solve all of your questions.

Linksys RE1000 firmware

Exactly same as routers, Linksys range extenders also have firmware updates that are used to fix some errors that you might face while using the device.

  The new firmware may gift us certain enhancements to the functions of the range extender and may be able to reload the device to avoid as well as remove dropping or poor connection.
Before proceeding with the firmware upgrade, make sure that you have done the following requirements thoroughly:

  • First of all download the latest and smartest firmware for your range extender from the Linksys Support Site
  • Make sure that you have download and save the file to the computer which you will utilize to update the Linksys range extender’s firmware.

IMPORTANT:  Do not try to upgrade the firmware of the range extender unless you are facing problems while using it or the new firmware has launched with a feature that you want to use. 

Accessing the RE1000 range extender’s web-based setup page

To upgrade the range extender’s firmware, follow the steps given below:

Step 1:
Connect the range extender directly to the computer using an Ethernet cable.  Make sure that the range extender is not connected to the router when performing the upgrade.

Step 2:
Access the range extender’s web-based setup page by opening a web browser and enter “” on the Address bar.  This is the default IP address of the extender.
NOTE:  If the range extender is already configured, you may either enter “” in the Address bar or check the router’s DHCP Client Table and look for the range extender’s IP address.  To learn how to do this, click here
Step 3:   
A pop-up window will appear, asking for a User Name and a Password.  Enter “admin” on both fields then click Log In.

The process to update the Linksys RE1000 firmware.

Step 1:
open the web-based setup page, click the Administration tab after that click on Firmware Upgrade sub-tab.

Step 2:
Click the Browse button.
Step 3:
 Now, select the firmware (.bin) file that you have downloaded earlier and then click on Open.

Step 4:
Click on Start Upgrade.

The progress of the upgrade process will be shown on the same page.  To avoid any confusion with the range extender, do not disturb the upgrade process

Step 5:
As the upgrade has been completed, click Continue when prompted.

Your Linksys RE1000 range extender is now upgraded to its latest firmware version.

Linksys RE1000 reviews

linksys re1000 reviews

 With a 3.4 star rating, this device has some pros and cons, consider these before making purchasing decisions.

Let’s give a look to at Linksys RE1000 reviews:

Pros –

  • Efficiently increased the signal strength
  • Extremely easy to setup
  • Effective traffic management system
  • Great wireless coverage
  • Instructions are very easy to follow
  • Packaged with all the necessary requirements

Cons –

It slows the internet speed by 50%

  Continuous signal drops out

 ❌ Little costly

You can take an informative tour to Linksys RE1000 manual and search for the effective and best-detailed solution to all your irritating internet and Linksys RE1000 related problems.

If then too, your problem is not resolved then you can directly contact the official website of Linksys RE1000 wireless range extender as we don’t provide any technical help through this article.

Remove dead spots and helps in enjoying internet spots.

FAQ Of Linksys Re1000

What default IP Address, username, and password can be used to login to the Linksys RE1000?

The default IP Address is and the Linksys RE1000 default password is “admin”. 

NOTE:  When the Linksys RE1000 is already connected to your home router, the router will automatically assign a different IP Address to it so that any  IP Address conflict will not occur. 

How can I see the wireless devices that are connected to my Linksys RE1000?

You can view the names along with MAC Address and Hop number information on the wireless connected clients by going to Status > WLAN Statistics > Wireless Clients Table on the Linksys RE1000’s web-based setup page.

6.  Can I set up a password to my Linksys RE1000 that is different from my router or access point?

Yes, definitely you can set different passwords. Just make sure to take note of the password to avoid problems logging into the extender’s web-based setup page.

What types of security does the Linksys RE1000 support?

The Linksys RE1000 extender supports the following wireless security options: 

  • WPA2/WPA Mixed mode
  • WPA2 PersonalWPA Personal 
  • Wired Equivalent Privacy (WEP).

Can I connect multiple wireless devices to my Linksys RE1000 like my router or access point?

Yes, you can connect multiple devices to your range extender as Linksys RE1000 acts as an extension to your home router or access point so you can connect multiple devices to it.