The Netgear ex6100 setup is extremely easy. You only need to follow the guidelines as stated and then freely enjoy your internet zones.

In this article, we will teach you a step-by-step procedure on Netgear ex6100 setup as an:

  • Extender (an extender extending Wi-Fi coverage in a remote area)
  • Access Point 
Table Of Contents

Netgear EX6100 setup ways:

  • As an extender
  • Access Point Installation

Steps for Netgear EX6100 installation:(As an Extender)

  • Firstly, set the switch on EX6100 to Extender.
  • Then plug the Netgear extender into an electrical outlet just halfway between the wireless router and your computer system.
  • Now, wait till the Power light turns solid green.

Note

If in case the device did not turn ON, then press the On/Off switch that is located on the side of the Netgear ac750.

  • On your wireless computer, or mobile phone, look for the available wireless networks and connect it to the EX6100 signal. Netgear range extender has two Wi-Fi networks:
  • 2.4GHz: EX6100_NETGEAR_2GEXT
  • 5 GHz: EX6100_NETGEAR_5GEXT
  • Once it is connected to the wireless network, the Netgear Client Link light will turn ON.
  • Now, in order to proceed with the NETGEAR EX6100 setup, open a web browser, and then enter www.mywifiext.net.
  • Choose the SSID for 2.4GHz and then click on Continue.

Note

Ensure that your wireless Netgear router supports the 5GHz band if you tap on the Skip button.

  • Enter the network Passphrase and then click on Continue.
  • Choose the SSID( network name )for 5GHz and then click on Continue.
  • Enter the network key and then click on Continue.

Note

You may also click on Skip if in case, you don’t want to connect your device to 5GHz or if you don’t have an existing 5GHz wireless network.

  • Choose Public Network or Private Network and then click on Continue.
  • Public: Means hotel Wi-Fi, Airport Wi-Fi, etc.
  • Private: Means your own house or office network.
  • Key in the required security settings for the Netgear wireless range extender and click on Continue.
  • Now, the genie will apply the settings.
  • Next, connect to the Netgear wireless network and then click on Continue.

Now, to finish the NETGEAREX6100 setup process, finally, click on Finish.

Access Point installation:

Step 1

For the NETGEAR EX6100 setup as an access point, set the switch on the Netgear ac750 to Access Point.

Step 2

 Now, to move with the NETGEAR extender setup, connect an Ethernet cable to the EX6100 Ethernet port from the wireless router.

Step 3

Then plug the Netgear extender into an electrical outlet just halfway between the wireless router and your computer system.

Step 4

Now, wait till the Power light turns solid green.

Note

If in case the device did not turn ON, then press the On/Off switch that is located on the side of the Netgear ac750.

Step 5

On your wireless computer, laptop, or mobile phone, view for the available wireless networks, then connect it to the Netgear range extender signal. Netgear ac750 has two Wi-Fi networks:

  • 2.4GHz: EX6100_NETGEAR_2GEXT
  • 5 GHz: EX6100_NETGEAR_5GEXT

Step 6

Once it is connected to the wireless network, the Netgear Client Link light will be ON.

Step 7

Now, open a web browser and then enter www.mywifiext.net.

Step 8

Select the SSID(network name) for 2.4GHz and then click on Continue.

Note

Ensure that your wireless Netgear router supports the 5GHz band if you click on the Skip button.

Step 9

 Key in the network Passphrase and then click on Continue.

Step 10

Choose the SSID( network name )for 5GHz and then click on Continue. Type the network key and then click on Continue.

Note

You may also click on Skip if in case, you don’t want to connect your device to 5GHz or if you don’t have an existing 5GHz wireless network.

Step 11

Choose Public Network or Private Network and then tap on Continue.

  • Public: Means hotel Wi-Fi, Airport Wi-Fi, etc.
  • Private: Your own house/ office network.

Key in the required security settings for the Netgear wireless range extender to keep the NETGEAR WiFi extender setup process secure and tap on Continue.

 Genie will automatically apply the settings.

Step 12

Next, connect to the Netgear wireless network, then click on Continue.

Step 13

Now, finally, you are done with the NETGEAR extender setup, just click on the Finish button.

It is the best WiFi extender with excellent connectivity and extension powers to extend it to the remote and hard to reach areas. It helps us in enjoying internet zones and effectively remove the dead zones from our house or workplace.

Now its your turn to avail the benefits of best WiFi extender and to eliminate all the dead spots from your home, as well as from your workplace.

You can take an informative tour to Netgear ex6100 manual and search for the effective and best-detailed solution to all your irritating internet and Netgear ex6100 setup related problems.

If then, too, your problem regarding NETGEAR WiFi extender setup is not resolved, you can directly contact the official website of Netgear range extender as we don’t provide any technical help through our articles.

How to reconnect Netgear extender

Till now you have learned about NETGEAR EX6100 setup. Now this part will provide you with instructions on how to reconnect the NETGEAR WiFi range extender to the home network. The extender should have previously connected to the wireless router and should obtain a valid IP address.

Reconnect your NETGEAR range extender via Ethernet cable:

Step 1

Firstly, connect the extender to your computer system through an Ethernet cable.

Step 2

Open any web browser on the computer just as you have done in the NETGEAR WiFi extender setup.

Step 3

Enter http://mywifiext.net in your internet browser’s address bar.

Step 4

Now, press Enter or tap on Search. Then the login page will appear.

Step 5

Key in the username along with a password that you have chosen during set-up.

Note

The default username of the extender is admin, and the default password is password. Ensure that the username, as well as password, are case sensitive.

To recover the password, look for the Username & Password Help link. To reset your login essentials, look for How can I perform a factory reset on my NETGEAR extender?

Step 6

Now, tap on login.

Step 7

Choose Setup > Wireless Settings.

Step 8

Verify that the value of the Password (Network Key) field matches with the router password, under Security Options.

Step 9

If your password does not match with it, then change it to the router password.

Step 10

Next, click on Apply.

Step 11

Finally, reconnect the WiFi devices to your Netgear ac750.

Netgear WiFi extender ex6100 is recommended to be one of the best WiFi extender with 4.5 star rating. Many of the users have a question about how to reconnect the Netgear WiFi extender ex6100 via WiFi.

So from here you can satisfy your query.

 Reconnect the NETGEAR WiFi range extender via WiFi:

Step 1

First of all, push and hold the Factory Settings button located on the side panel for at least 7 seconds.

Step 2

Now, open the computer or smartphone WiFi menu and then connect it to the extender’s default WiFi network, NETGEAR_EXT.

Step 3

Now, open any web browser on the connected device.

Step 4

Enter http://mywifiext.net in your browser’s address bar.

Step 5

Now hit Enter or click on Search.

 Then the login page will appear.

Step 6

Key in the username and password.

IMPORTANT:

The default username is admin, and the default password of your extender is password. The username, as well as password, are case sensitive.

Step 7

Click on LOG IN.

Step 8

Now follow the prompts properly to reconnect the extender to your home network.

Note

If your wireless router uses WEP security, then type its network name and password when asked.

Step 9

Finally, reconnect your WiFi devices to your Netgear WiFi extender EX6100.

Will your NETGEAR range extender work with your existing router?

 NETGEAR WiFi extender EX6100 are called as “universal” extenders. It means that they are highly compatible with the vast majority of wireless home routers, whether purchased separately or provided by an ISP (internet service provider).

 Some significant considerations about the compatibility of range extenders:

 Some of the Wi-Fi range extenders operate on both 2.4GHz band as well as the 5GHz band. If in case, your Wi-Fi router only supports 2.4GHz, then the extender can still be used, but its performance may vary depending on the band it uses. Assure to buy the version intended for your region, to make sure the compatibility with power standard along with power connections and local regulations.

Netgear ex6100 comes in the category of one ofthe best WiFi extenders among the top 10 wireless range extenders with reliable reviews and ratings. 

Why do we need to have the latest firmware for our NETGEAR WiFi extender EX6100?

 The latest firmware will help in improving the stability, durability, and performance of the product. The new and the updated firmware will correct all the issues, errors, and potentially add new and advanced features to your product.

Power light description Of Netgear EX6100

The Light-Emitting Diodes (LEDs) on the Netgear WiFi extender ex6100 determine the connectivity between the wireless router and the devices connected to it.

The power light arrows can help in diagnosing or isolate the problems of your range extender. Here is an example of what these LED arrows indicate on the Netgear range extender.

If the wireless signal is weak at the time of connecting to the extended network for the first time, then the arrow LED will blink on the Netgear WiFi extender for at least two minutes. A blinking arrow means that you must take the NETGEAR WiFi extender EX6100 to an ideal location for better Wi-Fi connectivity.

No Arrow LEDs Are Lit:

It means that the EX6100 is at an ideal location.

Left Arrow Is Blinking:

Then move your extender much closer to the router or gateway. If it is not possible, later try to improve and upgrade the line of sight between your router and your extender.

Right Arrow Is Blinking:

It means moving your extender closer to the client (the computer or device that is using the Netgear extender Wi-Fi network).

No LEDs lit: If in case, all of the LEDs are off, then it indicates that there is no connection.

How to update the extender firmware by passing the initial setup wizard:

Step 1

Firstly, connect it to the main router directly and then download the newest Netgear EX6100 firmware version in your computer system. 

 This can be easily found at the EX6100 Download Center.

Step 2

Now, connect the computer to the EX6100 and enter the following address in any web browser window, as shown below.

Note

Key in the following credentials only if a login prompt Pop up:
>>Username is admin
>>Password is itself  password

Step 3

Now, navigate to Maintenance > Firmware Update within the EX6100 Netgear interface and then browse to the downloaded extender firmware file.

Step 4

Now, click on the Upload button.

Once step 4 is complete, the Netgear EX6100 will be updated to the latest firmware version.

How to change the wireless settings of NETGEAR WiFi extender EX6100

To change the wireless settings follow the instructions given below:

Let’s begin

Step 1

Ensure that your wireless computer or smartphone is connected correctly to the Netgear EX6100 wireless network.

Step 2

Now, open a web browser and then enter www.mywifiext.net.

Step 3

When asked, enter admin as default username for the Netgear extender and password for default password.

Step 4

Now tap on Setup > Wireless Setup.

Step 5

Next, delete the existing network name and enter the new one. 

Note:

You can also set the SSID( network name) to be the same as the leading network.

 Step 6

Under Security Options, choose the desired security type

Step 7

Enter the new passphrase.

Step 8

Tap on Apply.

Note:

The computer system will be disconnected from the old network. Work with the wireless client utility to reconnect to the new and unique wireless network profile.

Netgear EX6100 Default Router Login

To work with your Netgear EX6100, you will require the IP of the device, the username as well as the password. You will find this useful information in the Manual of your wireless router. But if you don’t have the manual for the Netgear router or do not want to read the entire manual just to find the login information, you can read the instructions for the login guide below. To have the wireless router login page, it is mandatory that you are effectively connected to your router.

Netgear EX6100 Login Guide

Step 1

Launch the internet browser in any of the smart devices, whether phone or laptop.

Step 2

Detect your router IP address. After a few seconds, the tool will highlight a link to your wireless router login page. 

Step 3

You must view two text fields where you can type in your username as well as a password.

Step 4

The default username for the Netgear wireless range extender is admin.

 The default password for this is a password.

Step 5

Type the username along with the password in the password field and then hit “Enter” You can now see the control panel of the router.                                                                                                                              

For more information and help about NETGEAR WiFi extender and regarding any other problem, please go through Netgear ex6100 manual. It includes detailed information about this wireless range extender, which is 100% capable of giving efficient and a unique answer to all your questions.

Netgear ex6100 setup instructions WPS button

If you want Netgear WiFi extender setup using WPS button or if your existing network supports WPS then simply follow the steps given below. If you will follow the instructions given below in the given order then surely you will be able to successfully finish your Netgear WiFi extender setup process.

Let’s start:

Step 1

First of all, press the WPS button located on your Netgear Extender for at least 5 seconds. The WPS located in the front should blink.

Start 2

To proceed with the NETGEAR extender setup process, simply press the WPS button of your router, or access point, within 2 minutes and wait for around 2 minutes while the extender connects to the existing network.

If it is successful, then the WPS LED on your extender will turn solid green, the 2.4 GHz, Link Rate LED, will light up.

Note

 If the Link Rate LED does not lit up then repeat steps 1 and 2, or ensure the router supports WPS.

Step 3

If in case your router supports the 5 GHz band, then just repeat steps 1 and 2 to connect the extender to the 5 GHz band, and if it is successful, the 5 GHz Link Rate power light of your Extender will lit up.

Once the Netgear extender setup is complete, the extended network for each and every applicable band is broadcast as “network name_2GEXT” and “network name_5GEXT“. You may connect to your extender’s network through the same password as that of your router’s network.

Common NETGEAR WiFi extender setup issues

  • Cannot enter the Netgear extender login page.
  • Mywifiext. Net is not operating.
  • Username and password are invalid.
  • When you are not getting redirected to the setup page.
  • Your extender is connected, but there are no internet services.
  • Facing errors during accessing 192.168.1.250, mywifiext.Net, and mywifiext.Local.
  • The power light is not stable.
  • You are not able to update the extender firmware.
  • Not able to reset it properly.
  • Unable to enable MAC address.
  • Not able to find your NETGEAR WiFi extender EX6100 username and password.

How to fix the NETGEAR extender setup issues

  • Ensure that your extender is getting an efficient power supply.
  • Make sure that the Netgear EX6100 is located at the ideal location.
  • Avoid damaging Ethernet cables connected with a device.
  • Avoid placing the extender near a thick wall, juicer, mixer, Bluetooth speaker, treadmill, grinder, microwave, etc.
  • Avoid keeping the NETGEAR EX6100 login details as default because anyone very quickly hacks it.
  • Create your network name of at least eight characters and passwords of at least 15-16 characters.
  • Try using the latest version of the web browser to access the login page and mywifiext. Net setup.
  • Update the extender’s firmware regularly.
  • Try changing your password in a month or two.
  • The IP address of Netgear EX6100 must be correctly entered in the address bar.

If these above-mentioned troubleshooting tips are unable to solve your problem, then chat with Netgear extender professionals NOW.

As the professionals are available 24*7 to offer their services.