Linksys smart router set up is relatively quite easy and error-free. You can set up your home router with the help of www.linksyssmartwifi.com or through IP address 192.168.1.1 Linksys setup and easily access the Linksys Smart Wi-Fi page.
Linksys smart WiFi login
The process of setting up Linksys smart WiFi login is quite reliable and for this, you have to follow these steps:
- Firstly, open any web browser in a computer or in any other device that is connected to your router.
- Type linksyssmartwifi.com in the address bar.
- As you enter it, it will open up a login authentication page.
- Enter the default credentials in the username and password fields.
- The default username and password is admin.
- Then press enter.
- Once you have successfully logged in, it will take you to a BASIC home page.
Why linksyssmartwifi.com page is not responding?
There can be dozens of reasons that is why one is not able to access the linksyssmartwifi.com.
to remove these:
- Ensure all the physical connection, there can be an improper cable connection.
- It can also because of an invalid or wrong IP address.
- It can be because of the wrong user name and password.
- It can be because of the defective router.
- The router firmware needs to be updated on time to time basis.
- It can be because of firmware, as computer firmware might be blocking all the wireless connections.
- It can be because of network connection, there can be no or slow internet connection between your routers.
You can follow the below-mentioned troubleshoot steps to fix these issues.
Before moving towards troubleshooting steps ensure:
To power cycle your Linksys Smart Wi-Fi Router by turning it OFF then ON. With the help of a different web browser or clearing your browser’s cache data and then restart it. This may also help you in resolving it.
Now also if you are facing any problem then look at these troubleshooting steps:
Linksys Smart Wi-Fi Routers can automatically detect whether you have an active internet connection or you are having problems with connectivity.
If you do not have an active internet connection and that time if you are accessing Linksys smart WiFi then it may give an error and messages on the web browser.
Internet connection is slow
At the Linksys Smart Wi-Fi page, you may find an error message that will prompt as an Internet connection is slow.
This occurs at the time when your router is not able to detect an active internet connectivity from your Ethernet cable or DSL provider.
You can log in to the Linksys Smart Wi-Fi page by keying the Router Password. The default password of the router is admin.
NOTE: If you are the first time user, you are required to create a Linksys cloud account in order to increase the usage of Linksys Smart Wi-Fi Tools.
To eliminate this error, be attentive that you are getting connectivity from your smart modem facilities.
Apart from this, you can also reset your home router to its factory default settings. for this, you need to simply press and hold the Reset button which is located at the back of your Linksys Smart Wi-Fi Router for at least 10 seconds.
Router Not Found
This error message comes when you are logged in to your Linksys cloud account but it is unable to detect your router.
The router is not set up
This error message occurs if you continue to click on Retry after encountering the Router Not Found message. This may also appear after performing reset with your home router.
In order to eliminate this, you are required to set your Linksys smart WiFi as shown. ✔️Tick the box that commands, I understand that my network is currently open and not secure. I would like to use the Linksys Smart Wi-Fi Account to configure my router’s security settings.
Then click on Continue.
The Account Suspended error page appears because of many failed login attempts to your account.
To solve this error you may have to wait for at least 2 hours before trying again.
QUICK TIP: sometimes it happens that we are unable to recollect our account details than in that case perform a reset process on your router.
In order to reset your router, you are required to press and hold the Reset button for 10 seconds.
Linksys WiFi router settings again refresh to its factory settings once you have reset the device.
Unexpected Error 2123
If you encounter unexpected Error 2123, click on Ok. Proceed to reset and reconfigure the router.
NOTE: If you will be asked to do an update for the Linksys Smart Wi-Fi, undoubtedly proceed with the update. There will also be a prompt to create a Linksys cloud account, do not skip this and create it.
Error 2112 is a Linksys cloud access error that is a consequence of making a change in the configuration that is not adjustable with the device, or not compatible with the functionality of the firmware.
One example is if a user tries to push an invalid MAC address into the MAC Filtering settings, depending on which your home router they have, they may see error 2112. To solve this problem, a reset of the device is mandatory.
In order to reset you are required to press the reset button for at least 10 seconds.
This error ( Error 2118 ) occurs when there is an IPv6 related error on your wireless network.
To resolve this error, access your Linksys cloud account and go to Router Settings > Connectivity > Internet Settings > IPv6 and disable IPv6.
If then too it does not resolve the error then factory reset for the device is mandatory. After resetting You are required to upgrade the firmware of your router.
When the firmware has been successfully updated, do another reset with the same process, then move on reconfiguring your router.
This ( Error 2178 ) occurs when there are a number of devices in the network that have the same name or IP address.
To solve this, turn the devices OFF, then turn each of them back ON one by one.
By this, you have to follow the on / off policy.
If you’re still facing the same problem, turn your devices OFF again then after turning off access your Linksys cloud account.
The Network Map Toolpermits you to rename the devices. Ensure that you are not using the same name for two or more devices.
QUICK TIP: Device List Tool is showed in the form of a Network Map Tool in a few of the Smart Wi-Fi home Routers.
This error 2197 occurs when a conflict is created while trying to configure the IP address of your router but within the same range of your main router’s IP address.
If the DHCP Server is disabled, you can solve this issue by re-enabling it and afterward modifying the Start IP address.
After applying to the changes, un-check the box to disable the DHCP server.